|
|
Quick Connect Plumbing Systems
| Sea Tech, Inc. Fittings,
Valves, Manifolds, and Tubing are the number one choice for Boat
Builders and Marine Distributors worldwide. Over the last 7 years
Sea Tech, Inc. has become the predominate supplier of water plumbing
to the North American marine market with over 80% market
penetration.
Sea Tech products are applicable in
many nautical applications including potable water, raw and fresh
water washdown, live well systems, air-condition chilled water
lines, drain lines, and windshield washing systems. |
 |
| Making
a Connection |
|
|
Cut the tubing to
length and measure the insertion depth on the tubing end. Sea
Tech connectors have a insertion depth line molded onto the outside
of the connector bodies. |
|
Push the tubing
completely into the connector until it comes into contact with the
internal tubing stop. |
|
|
|
To disconnect
push the collet in squarely against the face of the fitting. With
the collet held in this position, the tubing can be removed. The
connectors can then be re-used. |
|
Connect to Multiple
Materials! The Sea Tech
fittings incorporate Stainless Steel Gripping Teeth in the Collets.
These corrosion resistant teeth allow SeaTech connectors to
interconnect with multiple materials without the need for special
tools or tube inserts. Safe to use with Copper, CPVC, PEX, LDPE,
MDPE, & HDPE Tubings and Polybutylene |
|
|
