Awlgrip Awl Fair

Call toll free - (877) 379-2248

Awl-Fair Fairing Compound

A two component premium trowelable filler for fairing, leveling, or smoothing surface imperfections due to gouges, pitting, dents, or weld seams. May be used above or below the waterline.

Part No.

Description (Click to view & order)

Price

awlD8020QT

awlD8020GL

awlD7007QT

awlD7007GL

awlD7010QT

awlD7010GL

Specification Data

Type: Two Component Epoxy
Packaging: Available in 1 gallon and 1 quart containers
Theoretical Coverage: Sq. Feet/Gallon
1,604 Sq. Feet at one mil dry
6.4 Sq. Feet; 1/4 inch; 250 mils (6,250 microns) DFT

Coverage calculations are based on theoretical transfer efficiency of 100%. Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and application environment.

Recoatability: AWL-FAIR® L.W. must be sanded before recoating. It must be overcoated with an epoxy primer such as 545 Epoxy Primer, High Build, AWL-QUIK®, or ULTRA-BUILD® before topcoating.

Product Components, Reducers, Additives, and
Auxiliary Components

AWL-FAIR® L.W. Base - White	D8020
AWL-FAIR® L.W. Converter - Red	D7007
Fast Dry	D7010

Application Equipment

Trowels, Spatulas, or Putty Knives.

Surface Preparation

Only apply over properly applied and prepared U.S. Paint primers. 545 Epoxy Primer and HIGH BUILD Epoxy Primer are preferred.

Mixing and Reduction

First shake or stir D7007 or D7010 to a uniform consistency. Mix by volume 1 part D7007 or D7010 with 1 part D8020. Thoroughly mix material to a uniform pink color with no streaks or lumps in the mix. Do not add thinners or reducers to AWL-FAIR® L.W.
Induction Time after Mixing: None
Anticipated Pot Life at 77°F/50% R.H: 30-45 Minutes

Application Instructions

Apply by trowel to an area you can work in 15 to 20 minutes. Start application in low areas and build out into high areas. Allow to cure. Several applications may be required to fill large areas. Block sand with 36-60 grit and blow off sanding dust and residue before applying more AWL-FAIR L.W. Shape material with tools of your choice.

Note:	AWL-FAIR® L.W. must be sealed with 545 Epoxy Primer when used below the waterline.
Note:	Filler primer, fairing materials, and sanding surfacers should be sealed with 545 Epoxy Primer before applying AWLGRIP® or AWLCRAFT® 2000 Topcoats. This will maximize gloss and color holdout in the topcoat.

Do not apply paint materials to surfaces warmer than 105°F or colder than 55°F. Do not attempt to cure products at temperatures below 55°F

Pyacht.com
222 Severn Avenue
Annapolis, MD 21403

Toll free: 1-877-379-2248
Local: (410) 268-9696
Fax: (410) 268-9625

Join our Email List
Enter your email address in the box below and click submit to receive bi-weekly product updates and special offers.

The mark "pyacht.com" and the "pyacht.com" logo are the property of Performance Yacht.com, Incorporated and are registered with the United States Patent and Trademark Office.